As I am looking forward E1 mini battery charging USB cable, I found this blog and found this link . It is just an USB to 3.5mm(/1.35) barrel connector. I puchased this at 2000KRW in Korean internet shopping mall ( here ).
큰 프로젝트 소스를 만들 경우에, Pre compiled header인 stdafx.h를 찾을 수 없다면서 에러가 나오는데, 대부분 소스 관리상 폴더를 만들어 둔 곳에서 문제가 발생한다. 다음 내용을 체크해보고 다를 경우 수정해준다. 1. #include "stdafx.h" 사용 ( / "..\stdafx.h"는 안됨) 2. 프로젝트 속성 > C/C++ > 미리컴파일된헤더사용 - 미리 컴파일된 헤더" 항목을 사용 (/Yu) 3. stdafx.cpp만 속성으로 가서 미리 컴파일된 헤더 > 미리 컴파일된 헤더" 항목을 만들기 (/Yc) 로 해두면 해당 에러가 나지 않는다.
1. Get linux bootable image like https://sourceforge.net/projects/systemrescuecd/files/sysresccd-x86/3.8.1/systemrescuecd-x86-3.8.1.iso/download 2. Rufus portable for linux image writing for usb drive. https://rufus.ie/ 3. Download uImage and uRamdisk files and copy them to USB drive. https://drive.google.com/drive/folders/0B_6OlQ_H0PxVRXllYjY5RG1CZEU 1) Developing/uImage-wdrecovery 2) Developing/uRamdisk-wdrecovery 4. Plug in USB drive and turn on PC with pressing boot select mode button. 5. Select GUI mode. 6. To make initialize hard drive, run gparted. 7. Delete all partition of hard drive (Be aware of right device path /mnt/sda or /mnt/sdb or /mnt/sdc i.e. my case was /mnt/sdb ) 8. Go back to terminal, then type follows: > parted /dev/sdb parted> mklabel gpt parted> mkpart primary 1049kB 2149MB parted> mkpart primary 8591MB -1MB parted> mkpart primary 7517MB 8591MB parted> mkpart primary 2149MB 3222MB parted> mkpart primary 3222MB 4296
Comments